Odyssey-2 Модификация прошивки под BPF-PA Anvelina
Добавлено: 08 май 2022 06:57
По причине так как были просьбы, по работать над прошивкой Odyssey-2 что бы сдр мог работать в режиме Анан-7000, что позволило бы использовать полноценно два бпф и все возможности платы BPF-PA Anvelina. На данный момент полностью все протестировали. Одиссей2 теперь определяется как Анан-7000 под номером прошивки 2.0, два бпф теперь функционируют, весь функционал который был до модернизации прошивки работает так же исправно.
Ниже прикрепляю фото подключения Оди2 к плате BPF-PA Anvelina, так же саму прошивку.
По вопросам плат BPF-PA Anvelina можно написать мне на мой имейл.
Для Европы и США можно на писать Айварсу YL2GVC.
English translation:
Due to the fact that there were requests to work on the Odyssey-2 firmware so that the SDR could work in the Anan-7000 mode, which would allow full use of two BPFs and all the features of the BPF-PA Anvelina board. So far everything has been fully tested. Odyssey2 is now defined as Anan-7000 with firmware number 2.0, two BPFs are now functioning, all the functionality that was before the firmware upgrade works just as well.
Below I attach a photo of connecting Odyssey-2 to the BPF-PA Anvelina board, as well as the firmware itself.
For questions about BPF-PA Anvelina boards, you can write to me on my email.
For Europe and the USA, you can write to Aivars YL2GVC.
Text translation from picture:
Firmware option for the board option with two BPFs (RX1, RX2)
Firmware modification from EU2AV, for the BPF board Anvelina 1.21_ANP
XVTR/TX
VHF transverter control output (TX)
Прошивка:
Ниже прикрепляю фото подключения Оди2 к плате BPF-PA Anvelina, так же саму прошивку.
По вопросам плат BPF-PA Anvelina можно написать мне на мой имейл.
Для Европы и США можно на писать Айварсу YL2GVC.
English translation:
Due to the fact that there were requests to work on the Odyssey-2 firmware so that the SDR could work in the Anan-7000 mode, which would allow full use of two BPFs and all the features of the BPF-PA Anvelina board. So far everything has been fully tested. Odyssey2 is now defined as Anan-7000 with firmware number 2.0, two BPFs are now functioning, all the functionality that was before the firmware upgrade works just as well.
Below I attach a photo of connecting Odyssey-2 to the BPF-PA Anvelina board, as well as the firmware itself.
For questions about BPF-PA Anvelina boards, you can write to me on my email.
For Europe and the USA, you can write to Aivars YL2GVC.
Text translation from picture:
Firmware option for the board option with two BPFs (RX1, RX2)
Firmware modification from EU2AV, for the BPF board Anvelina 1.21_ANP
XVTR/TX
VHF transverter control output (TX)
► Показать
- Modification_BPF-PA_Anvelina.png (621.29 КБ) 21999 просмотров